I took pics of the final strip, sand and initial stain process, but somehow lost them.. 2nd coat of stripper did the trick so I broke out the random orbital sander and some 220 grit and gave it a good sanding, wiped it down with acetone and let it dry for half an hour or so. I grabbed some Denatured Alcohol and some black TransTint dye and mixed up some stain. That wasn't dark enough, so I dribbled some of the dye on my rag and went to town. This is after the first round. I'll let it dry a bit then hit it again. It's already a huge improvement over the yellow color from before.